[email protected] +44 140 388 7124

Cap

Cap, GL-18, black, with dropper, tamper evident

CODE: 104468

In stock

Available in small quantities!

Stock (In main warehouse)
5110 pcs  
Stock (In other warehouse)
0 pcs  
Cap, DIN18, screw on, white, ribbed, PP, with tamper evident

CODE: 104787

In stock

Available in small quantities!

Stock (In main warehouse)
2496 pcs  
Stock (In other warehouse)
0 pcs  
Cap, GL-18, white, with foam liner, tamper evident

CODE: 104331

In stock

Available in small quantities!

Stock (In main warehouse)
707 pcs  
Stock (In other warehouse)
0 pcs  
Cap with brush, DIN18, screw on, white, ribbed, for 10 ml bottle

CODE: 104336

In stock

Available in small quantities!

Stock (In main warehouse)
627 pcs  
Stock (In other warehouse)
0 pcs  
Cap, 18 mm, screw on, black, ribbed, PP, tamper evident

CODE: 104866

In stock

Available in small quantities!

Stock (In main warehouse)
189 pcs  
Stock (In other warehouse)
0 pcs  
Cap, special necksize, flip top, snap on, blue, orifice 5 mm, PP - CAMPANA

CODE: 3165

Wholesale only

Available in large quantities!

Contact us for lead time and minimum order quantity (MOQ)!
Cap, 48 mm, blue (820), ribbed, PP, CRC and tamper evident, with moulded seal

CODE: 1795

Wholesale only

Available in large quantities!

Contact us for lead time and minimum order quantity (MOQ)!
Cap, 48 mm, white, PP, CRC and tamper evident, with moulded seal

CODE: 3449

 

Wholesale only

Available in large quantities!

Contact us for lead time and minimum order quantity (MOQ)!
Cap, 48 mm, red, PP, CRC and tamper evident, with moulded seal

CODE: 3481

Wholesale only

Available in large quantities!

Contact us for lead time and minimum order quantity (MOQ)!
Cap, 24/415, screw on, disc top, white, shiny, PP

CODE: 103893

Wholesale only

Available in large quantities!

Contact us for lead time and minimum order quantity (MOQ)!
Cap, 24/415, screw on, flip top, white, shiny, PP

CODE: 106023

Wholesale only

Available in large quantities!

Contact us for lead time and minimum order quantity (MOQ)!

It’s important to pick a cap primarily based on the product’s characteristics and function. For caps capable of dispensing, we must consider the product’s viscosity and the size of the bottle’s opening. For acidic and corrosive materials it’s especially important to pick the right material for the cap.

In our range of products you can find flip-open, disc top, push pull, measuring, drip and rinse caps, in threaded and snap versions, products made from plastic or metal. For certain products it might be important to use a tear-off or child-proof cap.

It’s beneficial to keep an eye on current trends and make sure that the colour of the cap matches the colour and other parameters of the bottle.

It is also important to consider the technical parameters of the cap. Make sure you have the right size and type for the neck.

The main function of the cap is for proper closing and sealing. For normal, threaded caps this is done with the EPE seal found at the bottom of the cap.

For dispensing caps, the proper closing is done by an internal flange, which rests on the inside part or the top of the bottle’s neck.

Matching the size and the type of the bottle and its matching cap, does not give a 100% guarantee that the cap will properly close. A perfect closing can only be determined after thorough trials and testing. 

 
Loading...